[an error occurred while processing this directive]

Advanced Micro Peripherals Ltd.

Member of the PC/104 Consortium

PC/104 Symbol

visit our web site.


About Advanced Micro Peripherals

Advanced Micro Peripherals is a leading manufacturer of embedded video solutions - offering the latest MPEG-4 / H.264 codecs and video overlay / annotation technologies on a wide range of embedded board form factors including PC/104 (pc104), PC/104-Plus (pc104+), CompactPCI and miniPCI modules. The AMP range of rugged, long-life embedded video hardware is matched with comprehensive software to capture, display and record from multi-channel NTSC / PAL video cameras. AMP also offers an extensive range of PC/104, PC/104-Plus and EBX format embedded PCs (SBC), communication controllers and power supplies to create complete (COTS) solutions for use in digital video recorders (DVR), telemetry and transportation infrastructure.

Our Products

We offer a wide range of PC/104 and PC/104+ modules including CPU boards, Multimedia video and Audio, Networking and communications. Some of our current range highlights are listed below:

H264-HD2000 - H.264 encoder for PCI/104
The H264-HD2000 is an ultra low latency H.264 encoder available on a single PCI/104 form factor board. The powerful encoding engine supports ultra low latency full frame rate encoding of two HD video sources at up to 1080p30.
›  40ms Ultra low latency
›  1080p High Definition DVI/HDMI
›  VGA Capture at up to 1280x1026 (SXGA) resolution
›  H.264 compression
›  Dual Channel
›  Enhanced band-width and storage capacity

H264-ULL-SD4 - 4-Channel H.264 encoder for PCI/104
The H264-ULL-SD4 is an ultra low latency, quad channel, H.264 encoder on a single PCI/104 form factor board. The H264-ULL-SD4 provides a powerful and flexible solution for capturing and compressing up to 4 analog video inputs at full size and at full frame rate to the H.264/MPEG-4 AVC (Part 10) standard
›  40ms Ultra low latency
›  H.264 compression
›  Quad channel
›  Advanced bit rate control modes
›  Dual Channel
›  Enhanced band-width and storage capacity

MPEG4000-D4 - 4-Channel MPEG-4 codec for PC/104-plus
The MPEG4000-D4 is a 4-channel MPEG-4 codec on a single PC/104-Plus form factor, it provides a low power and high performance solution for capturing and compressing up to 4 concurrent video inputs to MPEG-4 standard. The MPEG4000-D4 not only provides MPEG-4 compression but can also decompress and playback recordings from storage to display.
›  Four asynchronous PAL/NTSC/RS170 live video inputs
›  4 x 4CIF size MPEG-4 encode at full frame rate.
›  4 x 4CIF size Motion-JPEG encode at full frame rate.
›  MPEG-4 decode/playback.

VCODEC-H264-D4 - 4-Channel H.264 codec for PC/104-plus
The VCODEC-H264-D4 is a 4-channel H.264 codec on a single PC/104-Plus form factor, it provides a low power and high performance solution for capturing and compressing up to 4 concurrent video inputs to H.264 standard. The VCODEC-H264-D4 not only provides H.264 compression but can also decompress and playback recordings from storage to display.
›  Four asynchronous PAL/NTSC/RS170 live video inputs
›  4 x 4CIF size H.264 encode at full frame rate.
›  4 x 4CIF size Motion-JPEG encode at full frame rate.
›  H.264 decode/playback.

QuadGrabber - 4-channel capture and overlay controller for PC/104-plus
The QuadGrabber is a 4-channel video capture and overlay controller on a single PC/104-Plus card providing a simple solution for capturing four concurrent analog video inputs for local system display or software analysis and processing. The QuadGrabber allows each of the 4 video channels to be captured at full D1 size, all at full frame rate and then scaled, cropped and positioned under software control.
›  Supports 4 NTSC / RS-170, PAL / CCIR, SECAM analog video sources
›  4 x D1 size image capture at full frame rate
›  4 channel audio encoder
›  Arbitrary video window sizing, cropping and scaling

We Also Offer

  • Custom Design Services
  • CompactPCI and mini-PCI MPEG-4 codec boards

How to Contact Us

    ADVANCED MICRO PERIPHERALS - USA
    Suite 412
    234 5th Ave.
    New York, NY 10001 USA
    Phone: 212.951.7205
    Fax: 212.951.7206
    Email: sales@amp-usa.com
    Web: www.amp-usa.com

    ADVANCED MICRO PERIPHERALS - UK
    Unit 1, Harrier House
    Sedgeway Business Park
    Witchford, Cambridgeshire
    CB6 2HY, United Kingdom
    Phone: +44.1353.659 500
    Fax: +44.1353.659 600
    Email: sales@ampltd.com
    Web: www.ampltd.com